Ürün stoğu
KALİTELER
| Category | Grades (examples) | Standard | Typical use |
|---|---|---|---|
| Forming / deep drawing | DC01, DC03, DC04, DC05, DC06 | EN 10130 | Deep drawing, body parts |
| HSLA cold rolled | HC260LA, HC300LA, HC340LA, HC380LA, HC420LA | EN 10268 | Automotive reinforcements |
| Dual Phase (DP) | DP500, DP600, DP780, DP800 | EN 10338 | Crash zones, safety parts |
| Martensitic (MS) | MS700, MS900, MS1100, MS1200 | EN 10338 | High-strength safety parts |
| Complex Phase (CP) | CP600, CP800, CP1000 | EN 10338 | Structural automotive parts |
| TRIP steels | TRIP700, TRIP800, TRIP1000 | EN 10338 | Energy absorption |
| Electro-galvanizable grades | DC01EK, DC03EK, DC04EK | EN 10152 | Coating applications |
| Enamelling steels | DC04ED, DC05ED | EN 10209 | Enamelling, appliances |
| Electrical steel | CR4, CR5 | Various | Electrical housings |
| IF steels | IF180, IF200, IF260 | EN 10130 | Complex deep drawing |
| Alloyed cold rolled steels | C35E, C45E (version CR selon disponibilité) | EN 10132 | Springs, fine mechanics |
| Category | Grades (examples) | Standard | Typical use |
|---|---|---|---|
| Forming grade EG | DC01EK, DC03EK, DC04EK | EN 10152 | Forming, thin applications |
| Deep drawing EG | DC05EK, DC06EK | EN 10152 | Automotive body parts |
| HSLA EG | HC260LA EK, HC300LA EK, HC340LA EK | EN 10268 + EN 10152 | Structural parts |
| DP EG | DP500EK, DP600EK, DP780EK | EN 10338 + EN 10152 | Crash components |
| TRIP EG | TRIP700EK, TRIP800EK | EN 10338 + EN 10152 | Crash and energy absorption |
| Enamelling EG | DC04ED + ZE | EN 10209 + EN 10152 | Enamelled appliances |
| IF EG | IF180EK, IF200EK, IF260EK | EN 10130 + EN 10152 | Complex deep drawing |
| Electrical EG | CR4EK, CR5EK | Various | Electrical housings |
| Coating thickness | ZE25/25, ZE50/50, ZE75/75 | EN 10152 | Corrosion protection |
| Category | Grades (examples) | Standard | Typical use |
|---|---|---|---|
| Hot Dip Galvanized (Z) | DX51D, DX52D, DX53D, DX54D, DX56D ; S220GD, S250GD, S280GD, S320GD, S350GD | EN 10346 | Profiles, roofing, construction |
| Forming HDG | DX51D+Z, DX52D+Z, DX53D+Z, DX54D+Z | EN 10346 | Forming, appliances |
| Structural HDG | HX260LAD+Z, HX300LAD+Z, HX340LAD+Z, HX380LAD+Z | EN 10346 | Structural automotive |
| Galvannealed (ZF) | DX51D+ZF, DX52D+ZF, DX53D+ZF | EN 10346 | Car body painting |
| HSLA ZF | HX260LAD+ZF, HX300LAD+ZF, HX340LAD+ZF | EN 10346 | Automotive body panels |
| Aluminized (Alusi – AS) | AS100, AS120, AS150 / DX51D+AS | EN 10346 | Exhausts, ovens, high heat |
| Aluzinc / Galvalume (AZ) | AZ70, AZ100, AZ150, AZ185, AZ200 (sur base DX51D / DX52D) | EN 10346 | Roofing, cladding, sandwich panels |
| IF coated | IF180+Z, IF200+Z, IF260+Z | EN 10346 | Complex forming |
| DP coated | DP500+Z, DP600+Z, DP780+Z | EN 10346 / EN 10338 | Safety structures |
| TRIP coated | TRIP700+Z, TRIP800+Z | EN 10346 | Energy absorption |
| Coatings | Z100, Z140, Z200, Z275 ; ZF70/70 ; AS120 ; AZ150 | EN 10346 | Corrosion protection |
| Category | Grades (examples) | Standard | Typical use |
|---|---|---|---|
| General structural steels | S185, S235JR/J0/J2, S275JR/J0/J2, S355JR/J0/J2/K2 | EN 10025-2 | Construction, welding, structures |
| High-strength low-alloy (HSLA) | S315MC, S355MC, S420MC, S460MC, S500MC, S550MC, S600MC, S650MC, S700MC | EN 10149-2 | Laser cutting, bending, chassis, mechanical parts |
| Forming / deep drawing steels | DD11, DD12, DD13, DD14 | EN 10111 | Deep drawing, forming, complex shapes |
| Thermomechanical steels | S275M/ML, S355M/ML, S420M/ML, S460M/ML | EN 10025-4 | Heavy structures, bridges |
| Normalized steels | S275N/NL, S355N/NL, S420N/NL, S460N/NL | EN 10025-3 | Large structures, improved stability |
| Weathering steels (Corten) | S235JRW, S355JOW, S355J2W, S355K2W | EN 10025-5 | Facades, outdoor structures |
| Hollow structural steels | S275J2H, S355J2H, S420MH, S460QH | EN 10210 / 10219 | Tubes, frameworks |
| Shipbuilding steels | A, B, D, E, AH36, DH36, EH36, FH36 | NV / ABS / Lloyd’s | Ship hulls, marine structures |
| Wear-resistant steels | Hardox 400/450/500, Raex, Dillidur | Proprietary | Buckets, liners, abrasion |
| Boron steels | 30MnB5, 27MnCrB5 | EN 10083 | Quenching, agriculture |
| Alloy steels | 16MnCr5, 20MnCr5, 42CrMo4, 25CrMo4 | EN 10084 / EN 10083 | Gears, shafts, mechanical parts |
| Category | Grades (examples) | Standard | Typical use |
|---|---|---|---|
| Austenitic | 304 (1.4301), 304L (1.4307), 316 (1.4401), 316L (1.4404), 321 (1.4541), 347 (1.4550) | EN 10088 | Food, pharma, chemical, tanks |
| Ferritic | 409 (1.4512), 430 (1.4016), 441 (1.4509), 444 (1.4521) | EN 10088 | Exhausts, appliances |
| Martensitic | 410 (1.4006), 420 (1.4021 / 1.4028), 431 (1.4057), 440C (1.4125) | EN 10088 | Knives, tools, mechanical parts |
| Duplex | 2205 (1.4462), 2304 (1.4362) | EN 10088 | Offshore, marine |
| Super Duplex | 2507 (1.4410), Z100 (1.4501) | EN 10088 | Chloride-rich environments |
| Precipitation hardening | 17-4PH (1.4542), 15-5PH (1.4545) | EN 10088 / ASTM A564 | Aerospace, precision |
| High-temperature | 309 (1.4828), 310 (1.4845), 314 (1.4841) | EN 10095 | Furnaces, burners |
| Deep-drawing | 301 (1.4310), 304DDQ, 305 | EN 10088 | Complex forming |
| Magnetic grades | 409, 430, 410, 420 | EN 10088 | Industrial parts |
| Finishes | 2B, BA, NO.1, NO.4, Scotch-Brite, miroir, brut laminé | EN 10088 | Decoration, manufacturing |